New Epoxy anti slip coating solution

What is SupaPoxy©

SUPAPOXY© is a high quality, top of the range, very hard wearing, strongly chemical resistant, solvent less (100 solids No VoC’s), environmentally friendly epoxy anti-slip protective coating providing a tough hard wearing and long lasting non slip surface. SupaPoxy© aesthetically pleasing and also easily cleaned. The product is also fast curing (3 to 4 hours for each layer at 20 Celsius)

SupaPoxy© has high chemical and stain resistance, and is suitable for foot and vehicular traffic including forklifts.

Anti-slip media for floor coating is incorporated in to the product to provide a sustainable slip resistance rating up to the highest classification.

Advantages

SupaPoxy© is self-priming. No need for additional primers.
Solids content: 100%.
No Voc's. Meets the Greenstar environmental building criteria.
Can be applied to slightly damp concrete.
Non taint application.
Range of colours either in colour pack or factory tinted for large quantities.
Suitable for food preparation areas.
Heavy Duty.
Suitable for foot and vehicular traffic including forklifts.
Gives an aesthetically pleasing finish.
Has high chemical resistance.
Anti-slip grit added to achieve any required anti-slip rating.
Meets IEQ 13 GBCA.

Uses

SUPAPOXY© is suitable as non slip protective* coating for:

Industrial, commercial, residential and domestic floors and walls.
Heavy duty industrial traffic.
Car Parks.
Hospitals.
Schools.
Plant Rooms.
Food, meat (abattoirs) and beverage production or processing areas.
Warehousing facilities.
Garbage and refuse areas.
Waste water treatments.
Commercial kitchens.
Chemical production areas.
Factory floors.
Motor Vehicle workshops.
Wash and change rooms.
Mining operations and facilities.
Correctional facilities.
Port and marine facilities.

Suitable Surfaces

SupaPoxy© is mainly used on concrete surfaces, but it is also suitable for steel, timber, wood, CFC sheeting, vinyl, previously coated as well as several other surfaces.

Additional Uses

Colours

SupaPoxy Colour packs are available in the following standard colours:
White, Black, Light Grey, Koala Grey, Deep Grey, Red Oxide, harbour Blue and Sand.
Special colours maybe available, but minimum quantity applies. Please contact us for any special colour requirement.

White	Black	Light Grey	Koala Grey
			N45 Koala Grey
Deep Grey	Red Oxide	Harbour Blue	Sand
		B42 Harbour Blue

Disclaimer: The colour samples shown here are as near to the actual colours as possible. Actual colours may vary from representation on screen and from batch to batch. Prospective users and specifiers MUST satisfy themselves as to the suitability of coating and colour prior to application.

For detailed specification sheet please click HERE